GYTS Corrugated Steel Tape Armored Duct Aerial Single Mode Optical
The fibers, 250um, are positioned in a loose tube made of a high
modulus plastic.The tubes are filled with a water-resistant filling
compound. A Fiber Reinforced Plastic locates in the center of core
as a nonmetallic strength member.
The tubes are stranded around the strength member into a compact and circular core.After the cable core is
with the filling compound to protect it from water ingress. The
cable is completed with a PE sheath.
1. Good mechanical and temperature performance
2. High strength loose tube that is hydrolysis resistant
3.Special tube filling compound ensure a critical protection of
4. Crush resistance and flexibility
5.The following measures are taken to ensure the cable watertight
6.Steel wire used as the central strength member
5.Loose filling compound
6.100%cable core filling
7.APL moisture barrier
8.PSP enhancing moisture-proof
9. Water-blocking material
1. Up to 288 fibers.
2. The loose tube stranding technology control the exact length of
tube, to make sure the good pulling resisting and temperature
characteristic, and the ointment filled lossely tube for good
3.PE sheath with good UV resisting and protecting cracking as
4.single strength steel member, fill fiber compound, APL(Aluminum
polymer tape) wrapped, and PSP wrapped (polyethylene steel tape),
good water-resisting material.
relay communication system;
core network, metropolitan area network and access network etc.
|Fiber core qty||Fiber cable diameter(mm)|